Cisco CCNA Data Center 640-911 dumps exam preparation kit contains all the necessary 640-911 questions that you need to know. The best useful latest Cisco CCNA Data Center 640-911 dumps vce youtube demo update free shared. “Introducing Cisco Data Center Networking” is the name of Cisco CCNA Data Center https://www.leads4pass.com/640-911.html exam dumps which covers all the knowledge points of the real Cisco exam. You can download 640-911 DCICN – Cisco dumps pdf training material from lead4pass and pass the Cisco 640-911 exam in the first attempt.
Vendor: Cisco
Certifications: CCNA Data Center
Exam Name: Introducing Cisco Data Center Networking
Exam Code: 640-911
Total Questions: 208 Q&As
Latest Cisco 640-911 dumps pdf training resources: https://drive.google.com/open?id=0B_7qiYkH83VRN3U2eVlMXzV5RmM
Latest Cisco 642-998 dumps pdf training resources: https://drive.google.com/open?id=0B_7qiYkH83VRU1g2SDg0bVYzbHc
The best 700-260 dumps Cisco exam test practice questions and answers free download. Best useful Cisco CCNA Data Center 640-911 dumps vce software download free try.
Hot Cisco CCNA Data Center 640-911 Dumps Exam Questions And Answers (1-30)
QUESTION 1
How many bits are in an IPv4 address?
A. 32
B. 24
C. 8
D. 4
Correct Answer: A
QUESTION 2
Which two options are groups of network protocols that are categorized into the following OSI layers: application, data link, network, and transport? (Choose two.)
A. FTP, LLDP, GRE, BGP
B. RDP, CDP, EIGRP, UDP
C. SSH, LLDP, ICMP, TCP
D. Telnet, ICMP, EIGRP, FTP
Correct Answer: BC
QUESTION 3
A customer wants to connect to their SAN via Fibre Channel. Which two devices can be used to provide connectivity? (Choose two.)
A. Cisco MDS 9148 Multilayer Fabric Switch
B. Cisco Nexus 7010 Switch
C. Cisco Nexus 5548UP Switch
D. Cisco Catalyst 6509 Switch
E. Cisco Nexus 2248TP GE Fabric Extender
Correct Answer: AC
QUESTION 4
Which device forwards data based on the destination IP address?
A. repeater
B. bridge
C. switch
D. router
E. hub
Correct Answer: D
QUESTION 5
Which three options describe routers compared to switches? 640-911 dumps (Choose three.)
A. use IP address tables for information lookup
B. concerned with packet forwarding
C. operate at Layer 3 of the OSI model
D. operate at Layer 2 of the OSI model
E. use MAC address tables for information lookup
F. concerned with the local delivery of frames
Correct Answer: ABC
QUESTION 6
Which command should you use to configure a Cisco Nexus switch port for Layer 2 operation?
A. nexus(config-if)#switchport
B. nexus(config-if)#layer-2
C. nexus(config-if)#routed
D. nexus(config)#interface vlan 10nexus(config-if)#switchport
Correct Answer: A
Explanation:
“If you want to configure a Layer 3 interface for Layer 2, enter the switchport command. Then, if you change a Layer 2 interface to a routed interface, enter the no switchport command.”
QUESTION 7
Which protocol operates at Layer 3 of OSI model and is used for host addressing?
A. TCP
B. UDP
C. IP
D. RIP
E. OSPF
Correct Answer: C
QUESTION 8
Which two networking devices forward data based on destination MAC address? (Choose two.)
A. Repeater
B. Bridge
C. Switch
D. Router
E. Hub
Correct Answer: BC
QUESTION 9
What is the default periodic interval at which RIPv1 sends routing updates?
A. 15 seconds
B. 30 seconds
C. 45 seconds
D. 60 seconds
E. 90 seconds
F. RIPv1 only sends routing updates when the topology changes.
Correct Answer: B
Explanation:
“Originally, each RIP router transmitted full updates every 30 seconds.”
QUESTION 10
Refer to the exhibit. When PC-A communicates with the Server what will the source MAC address be in the received frames at PC-A?
A. MAC address of router interface Eth1
B. MAC address of router interface Eth2
C. MAC address of the NIC in the Server
D. MAC address of switch interface E1/9
Correct Answer: A
QUESTION 11
What is the maximum distance that is supported by Cisco passive Twinax cables?
A. 3 m
B. 4 m
C. 5 m
D. 10 m
Correct Answer: C
QUESTION 12
What is the dotted hexadecimal representation of the IP address 172.13.99.225?
A. AC.0D.63.E1
B. AB.63.99.D5
C. E2.1D.E1.66
D. BC.0C.C3.1F
E. CC.0D.F3.21
Correct Answer: A
QUESTION 13
Which two VTP modes allow the creation of local VLANs? (Choose two.)
A. transparent
B. native
C. server
D. client
E. on
Correct Answer: AC
QUESTION 14
Which network topology is most closely associated with classical CSMA/CD?
A. bus
B. token passing bus
C. star
D. extended star
E. ring
Correct Answer: A
QUESTION 15
What is the maximum number of fabric modules that can be installed in a Cisco Nexus 7000 chassis?
A. 4
B. 5
C. 6
D. 7
Correct Answer: B
QUESTION 16
Which two layers of the OSI model relate to the transmission of bits over the wire and packet forwarding based on destination IP address? 640-911 dumps (Choose two.)
A. 1
B. 2
C. 3
D. 4
E. 5
Correct Answer: AC
QUESTION 17
Unlike IPv6, which feature is available only in IPv4?
A. broadcast
B. anycast
C. multicast
D. unicast
Correct Answer: A
QUESTION 18
A network engineer is tasked with installing a new switch into the network access layer. The switch needs to see VTP data, but does not need to participate in the VTP domain. What VTP mode should the switch be configured for?
A. client
B. transparent
C. server
D. off
E. active
Correct Answer: B
QUESTION 19
What is the order of the OSI stack starting at Layer 1 and ending at Layer 7?
A. Application, Presentation, Session, Transport, Network, Data Link, Physical
B. Application, Presentation, Transport, Data Link, Session, Physical, Network
C. Physical, Network, Transport, Data Link, Session, Application, Presentation
D. Physical, Data Link, Network, Transport, Session, Presentation, Application
E. Presentation, Application, Data Link, Session, Network, Transport, Physical
Correct Answer: D
QUESTION 20
Refer to the exhibit.
Which type of network communication is depicted?
A. 802.3 frame
B. Ethernet packet
C. TCP frame
D. UDP packet
Correct Answer: A
QUESTION 21
There is a large amount of traffic inside a network segment with a destination address of FF:FF:FF:FF:FF:FF. What type of traffic uses this address?
A. FF:FF:FF:FF:FF:FF is the Layer 2 broadcast address.
B. FF:FF:FF:FF:FF:FF is the Layer 2 network address.
C. FF:FF:FF:FF:FF:FF is the Layer 3 broadcast address.
D. FF:FF:FF:FF:FF:FF is the Layer 3 network address.
E. FF:FF:FF:FF:FF:FF is multicast traffic.
Correct Answer: A
QUESTION 22
A network engineer has been tasked with connecting a Nexus 5548 switch to an older Catalyst 3750. After configuring the interfaces, the engineer noticed that the end hosts did not have network connectivity and the Nexus 5548 had the following log message:
%STP-2-BRIDGE_ASSURANCE_BLOCK: Bridge Assurance blocking port Ethernet1/27 VLAN0010 What command can solve this problem?
A. configure no spanning-tree port type network on the Nexus 5548 interface
B. configure spanning-tree mode rapid-pvstp on the Catalyst 3750
C. configure switchport trunk native VLAN 10 on the Catalyst 3750 interface
D. configure spanning-tree mode rapid-pvstp on the Nexus 5548
Correct Answer: A
QUESTION 23
Refer to the exhibit. What two commands will allow the Nexus 5000 switch to continue to boot? (Choose two.)
A. boot n5000-uk9-kickstart.5.2.1.N1.4.bin
B. load n5000-uk9.5.2.1.N1.4.bin
C. copy kickstart-latest n5000-uk9-kickstart.5.2.1.N1.4.bin startup
D. copy system-latest n5000-uk9.5.2.1.N1.4.bin
E. boot n5000-uk9.5.2.1.N1.4.bin admin-password Cisco123
F. load n5000-uk9-kickstart.5.2.1.N1.4.bin
Correct Answer: AB
QUESTION 24
Refer to the exhibit. Both Cisco Nexus 5596UP Switches have one Layer 3 card installed each. Which two additional options are available? (Choose two.)
A. Eight additional Cisco Nexus 2000 switches can be connected in the same manner.
B. Sixteen additional Cisco Nexus 2000 switches can be connected eight individually to each 5596.
C. One additional Layer 3 expansion module can be installed in each 5596 to increase the Layer 3 forwarding capability.
D. FEX ports can be configured as router ports, extending Layer 3 redundancy to top of rack.
E. FEX ports can be configured for FCoE, reducing cabling footprint.
F. Sixteen additional Cisco Nexus 2000 switches can be connected in the same manner.
Correct Answer: AB
QUESTION 25
What is the maximum distance that is supported by Cisco active Twinax cables?
A. 8 m
B. 10 m
C. 12 m
D. 15 m
Correct Answer: B
QUESTION 26
Which statement is correct regarding a routed port on a multilayer switch?
A. A routed port requires an SVI definition.
B. Routed ports cannot be configured on a multilayer switch that uses SVIs.
C. A maximum of 32 routed ports can be provisioned on a given multilayer switch.
D. A routed port is a physical port that supports Layer 3 routing.
Correct Answer: D
QUESTION 27
Which three options represent a subnet mask that allows for 60 host addresses on a subnet? 640-911 dumps (Choose three.)
A. /25
B. 255.255.255.192
C. /26
D. 255.255.255.240
E. 255.255.255.248
F. /28
G. /30
Correct Answer: ABC
QUESTION 28
Where does Cisco Nexus Operating System store the startup configuration file?
A. RAM
B. flash
C. bootflash
D. volatile
E. NVRAM
Correct Answer: E
Explanation:
“A persistent copy of Cisco Router configuration file is called as “startup-config” file. The “startup-config” file is kept in NVRAM and the contents of the “startup- config” file are retained after a reboot.”
QUESTION 29
What are two advantages of employing an external router for inter-VLAN routing over an IEEE 802.1Q trunk link? (Choose two.)
A. Layer 3 functionality is not required on the switch.
B. The router facilitates communication between VLANs.
C. The single traffic path is optimized.
D. Latency is reduced as packets leave the switch.
E. Equal-Cost Multipath is supported.
Correct Answer: AB
QUESTION 30
How many IP addresses are usable for a subnet that has the address 10.6.128.0/21?
A. 1024
B. 2048
C. 1022
D. 2046
E. 256
Correct Answer: D
Lead4pass is the best IT learning material provider. Lead4pass provide the newest and cheapest questions and answers. Lead4pass is the correct choice for IT learning materials, help you pass your exam easily.
Useful Cisco CCNA Data Center 640-911 dumps pdf practice files and study guides free download from lead4pass. High quality Cisco CCNA Data Center https://www.leads4pass.com/640-911.html dumps pdf training resources which are the best for clearing 640-911 exam test, and to get certified by Cisco CCNA Data Center, download one of the many PDF readers that are available for free with high pass rate.
The Following Are Some Reviews From Our Customers:
