350-801 Implementing and Operating Cisco Collaboration Core Technologies (CLCOR) - Free sharing of CompTIA (A+, Cloud+, Cloud Essentials, CySA+, Linux+...) exam questions and answers, PDF, Brain Dumps, and Cisco, Microsoft, Citrix... dumps

Use Lead4Pass 350-801 dumps for the 2022-2023 350-801 CLCOR Certification Exam

Posted by admin on December 21, 2022 in 350-801 Implementing and Operating Cisco Collaboration Core Technologies (CLCOR), Cisco, Cisco 350-801, cisco 350-801 dumps, cisco 350-801 exam topics, cisco 350-801 practice exam, cisco 350-801 study guide, Cisco CCNP, implementing and operating cisco collaboration core technologies (clcor 350-801)

Lead4Pass 350-801 dumps contain 351 exam questions and answers, provide PDF and VCE exam tools, prepare for the 2022-2023 350-801 CLCOR certification exam, and guarantee 100% pass.

Now use 350-801 dumps: https://www.leads4pass.com/350-801.html, enjoy 365 days of free updates, and a 15% discount, promo code “Cisco“.

350-801 certification exam questions and answers

Also, share some of the Lead4Pass 350-801 dumps exam questions and answers for free:

Number of exam questions	Exam name	Exam code	Last updated
15	Implementing and Operating Cisco Collaboration Core Technologies (CLCOR)	350-801	350-801 dumps

Question 1:

Which settings are needed to configure the SIP route pattern in Cisco Unified Communications Manager?

A. pattern usage, IPv6 pattern, and SIP trunk/Route list

B. pattern usage, IPv4 pattern, IPv6 pattern, and description

C. pattern usage, IPv4 pattern, and SIP trunk/Route list

D. SIP trunk/Route list, description, and IPv4 pattern

Correct Answer: B

Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmcfg/CUCM_BK_C95ABA82_00_admin-guide-100/CUCM_BK_C95ABA82_00_admin-guide-100_chapter_0100111.pdf

Question 2:

An engineer configures Cisco Unified Communications Manager to prevent toll fraud. At which two points does the engineering block the pattern in Cisco Unified CM to complete this task? (Choose two.)

A. route pattern

B. route group

C. translation pattern

D. partition

E. CSS

Correct Answer: CE

Question 3:

Which open-standard protocol is the basis for the Extensible Messaging and Presence Protocol?

A. JSON

B. SIP

C. XML

D. HTTP

Correct Answer: C

Question 4:

Refer to the exhibit. You deploy Mobile and Remote Access for Jabber and discover that Jabber for Windows does not register to Cisco Unified Communication Manager while outside of the office. What is the cause of this issue?

A. Server 4.2.2.2 is not a valid DNS server.

B. The DNS record should be created for _cisco-uds._tcp.example.com.

C. The DNS record should be changed from _collab-edge._tcp.example.com to __collab-edge _tls.example.com.

D. The DNS record type should be changed from SRV to A.

Correct Answer: C

Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Windows/9_7/CJAB_BK_C606D8A9_00_cisco-jabber-dns-configuration-guide/CJAB_BK_C606D8A9_00_cisco-jabber-dns-configuration-guide_chapter_010.html

Question 5:

Refer to the exhibit. An administrator configures fax dial-peers on a Cisco IOS gateway and finds that faxes are not working correctly Which change should be made to resolve this issue?

A. codec g723ar63

B. codec g729br81

C. codec g726r32

D. codec g711ulaw

Correct Answer: D

Question 6:

Which action enables Cisco MRA?

A. Cisco UCC Express clients can obtain VPN connectivity to Cisco UCC Enterprise.

B. VPN connectivity can be established to Cisco UCM.

C. Clients such as Cisco Jabber can use call control on Cisco UCM.

D. Internal SIP clients registered to Cisco UCM can call external companies

Correct Answer: C

Question 7:

Which two functions are provided by Cisco Expressway Series? (Choose two.)

A. interworking of SIP and H.323

B. endpoint registration

C. intercluster extension mobility

D. voice and video transcoding

E. voice and video conference

Correct Answer: AB

Reference: https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-11/Cisco-Meeting-Server-2-4-with-Cisco-Expressway-Deployment-Guide_X8-11-4.pdf

Question 8:

How does an administrator make a Cisco IP phone display the last 10 digits of the calling number when the call is in the connected state, and also display the calling number in the E.164 format within call history on the phone?

A. Configure a translation pattern that has a Calling Party Transform Mask of XXXXXXXXXX.

B. On the inbound SIP trunk, change Significant Digits to 10.

C. Change the service parameter Apply Transformations On Remote Number to True.

D. Configure a calling party transformation pattern that keeps only the last 10 digits.

Correct Answer: C

Question 9:

Endpoint A is attempting to call endpoint B. Endpoint A only supports G.711 law with a packetization rate of 20 ms, and endpoint B supports a packetization rate of 30 ms for G.711ulaw. Which two media resources are allocated to normalize packetization rates through transrating?

A. Hardware MTP on Cisco IOS Software

B. Software MTP on Cisco Unified Communication Manager

C. Software MTP on Cisco IOS Software

D. Software transcoder on Cisco unified Communications manager

E. Hardware transcoder on Cisco IOS Software

Correct Answer: BD

Question 10:

Which program is required to deploy the Cisco Jabber client on an on-premises Cisco collaboration solution?

A. Cisco Unity Connection

B. Cisco Expressway-C

C. Cisco UCM

D. Cisco UCM IM and Presence

Correct Answer: C

Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/14_0/cjab_b_deploy-jabber-on-premises-14_0/cjab_b_deploy-jabber-on-premises-129_chapter_010000.html

Exam D

Question 11:

An administrator would like to set several Cisco Jabber configuration parameters to only apply to mobile clients (iOS and Android). How does the administrator accomplish this with Cisco Jabber 12.9 and Cisco UCM 12.5?

A. Assign the desired configuration file to “Mobile” Jabber Client Configuration in the Service Profile.

B. Deploy jabber-config-user.xml on iOS and Android devices.

C. Upload the jabber-config.enc file to TFTP

D. Create a user profile in Jabber Policies.

Correct Answer: A

Question 12:

What is a software-based media resource that is provided by the Cisco IP Voice Media Streaming Application?

A. video conference bridge

B. auto-attendant

C. transcoder

D. annunciator

Correct Answer: D

Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/collab09/clb09/media.html

Question 13:

Users dial a 9 before a 10-digit phone number to make an off-net call All 11 digits are sent to the Cisco Unified Border Element before going out to the PSTN The PSTN provider accepts only 10 digits. Which configuration is needed on the Cisco Unified Border Element for calls to be successful?

A. Option A

B. Option B

C. Option C

D. Option D

Correct Answer: A

Question 14:

Which two steps should be taken to a provision after the Self-Provisioning feature was configured for end users?

A. Dial the self-provisioning IVR extension and associate the phone with an end user.

B. Plug the phone into the network.

C. Ask the Cisco UCM administrator to associate the phone with an end user.

D. Enter the settings menu on the phone and press *,*,# (star, star, pound).

E. Dial the hunt pilot extension and associate the phone with an end user.

Correct Answer: AB

Question 15:

An engineer configures a Cisco Unified Border Element and must ensure that the codecs negotiated to meet the ITSP requirements. The ITSP supports G.711ulaw and G.729 for audio and H.264 for video. The preferred voice codec is G.711. Which configuration meets this requirement?

A. Voice class codec 10 codec preference 1 g711ulaw codec preference 2 g729r8 video codec h264

dial-peer voice 101 VoIP

session protocol sipv2

destination el64-pattern-map 1

voice-class codec 100

B. Voice class codec 10 codec preference 1 g711ulaw codec preference 2 g729r8

dial-peer voice 101 VoIP

session protocol sipv2

destination el64-pattern-map 1

voice-class codec 10

C. Voice class codec 10 codec preference 1 g711ulaw codec preference 2 g729r8 video codec h264

dial-peer voice 101 VoIP

session protocol sipv2

destination el64-pattern-map 1

voice-class codec 10

D. Voice class codec 10 codec preference 1 g729r8 codec preference 2 g711ulaw video codec h264

dial-peer voice 101 VoIP

session protocol sipv2

destination el64-pattern-map 1

voice-class codec 10

Correct Answer: C

Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/voice/cube/configuration/cube-book/cube-codec-basic.html

…

Select For 2022-2023 350-801 dumps https://www.leads4pass.com/350-801.html (351Q&A), 100% pass 350-801 CLCOR Certification Exam.

[Updated] Share free Cisco 350-801 exam tips questions and 350-801 dumps from Lead4pass

Posted by admin on July 13, 2022 in 350-801 Implementing and Operating Cisco Collaboration Core Technologies (CLCOR), Cisco, Cisco 350-801, cisco 350-801 dumps, cisco 350-801 exam topics, cisco 350-801 practice exam, cisco 350-801 study guide, Cisco CCNP, implementing and operating cisco collaboration core technologies (clcor 350-801), implementing and operating cisco collaboration core technologies (clcor) pdf

Lead4Pass has updated Cisco 350-801 dumps issues! The latest 350-801 exam questions can help you pass the exam! All questions are corrected
to ensure authenticity and effectiveness! Download the Lead4Pass 350-801 VCE dumps or PDF dumps: https://www.leads4pass.com/350-801.html (Total Questions: 347 Q&A)

Cisco 350-801 Practice testing questions from Youtbe

Braindump4it Exam Table of Contents:

Latest Cisco 350-801 google drive
Effective Cisco 350-801 Practice testing questions
Lead4Pass Year-round Discount Code
What are the advantages of Lead4pass?

Latest Cisco 350-801 google drive

^{[Latest PDF]} Free Cisco 350-801 pdf dumps download from Google Drive: https://drive.google.com/file/d/1cIN4rk2SC3iQBAoqjJIVabGV8pyOu_wN/

[Updated 2022] https://drive.google.com/file/d/1Ri6UVCFsC8Qac9bchCfVEmVT3T0lJMzg/

[Updated 2022] Latest Cisco 350-801 dumps exam questions Free sharing

Question 1:

What is the element of Cisco Collaboration infrastructure that allows Jabber clients outside of the network to register in Cisco Unified Communications Manager and use its resources?

A. Cisco IM and Presence node

B. Cisco Unified Border Element

C. Cisco Expressway

D. Cisco Prime Collaboration Provisioning server

Correct Answer: C

Question 2:

A Cisco Unity Connection administrator must set a voice mailbox so that it can be accessed from a secondary device. Which configuration on the voice mailbox makes this change?

A. Attempt Forward routing rule

B. Alternate Extensions

C. Alternate Names

D. Mobile User

Correct Answer: B

Question 3:

Which Cisco Unified Communications Manager configuration is required for SIP MWI integrations?

A. Select “Redirecting Diversion Header Delivery – Inbound” on the SIP trunk.

B. Enable “Accept presence subscription” on the SIP Trunk Security Profile.

C. Enable “Accept unsolicited notification” on the SIP Trunk Security Profile.

D. Select “Redirecting Diversion Header Delivery – Outbound” on the SIP trunk.

Correct Answer: C

Question 4:

An engineer troubleshoots poor voice quality on multiple calls. After looking at packet captures, the engineer notices high levels of jitter. Which two areas does the engineer check to prevent jitter? (Choose two.)

A. The network meets bandwidth requirements.

B. MTP is enabled on the SIP trunk to Cisco Unified Border Element.

C. Cisco UBE manages voice traffic, not data traffic.

D. All devices use wired connections instead of wireless connections.

E. Voice packets are classified and marked.

Correct Answer: AE

Question 5:

A customer has Cisco Unity Connections that is integrated with LDAP. As a Unity Connection administrator, you have received a request to change the first name of the VM user. Where must the change be performed?

A. Cisco Unity Connection

B. Cisco Unified Communications Manager end-user

C. Active Directory

D. Cisco IM and Presence

Correct Answer: C

[Updated 2022] Get more up-to-date Cisco 350-801 exam questions and answers

Share Cisco 350-801 exam questions for free

QUESTION 1:

A customer wants a video conference with five Cisco TelePresence IX5000 Series systems. Which media resource is necessary for the design to fully utilize the immersive functions?

A. Cisco PVDM4-128
B. software conference bridge on Cisco Unified Communications Manager
C. Cisco Webex Meetings Server
D. Cisco Meeting Server

Correct Answer: D

QUESTION 2:

Refer to the exhibit. lead4pass 350-801 practice test q2

Assume that the bottom logical partition policy entry in Cisco Unified Communications Manager was provisioned last.

How is the call treated when an IP phone in the Bangalore GeoLocation places a call to an MGCP gateway with FXS ports in the San Jose GeoLocation?

A. The call is denied because the last added logical partition policy takes precedence when multiple matches exist.

B. The call is allowed because the first listed logical partition policy takes precedence when multiple matches exist.

C. The call is denied because the call flow matches neither policy entries.

D. The call is allowed because the call flow matches neither policy entries.

E. The call is allowed because only the top policy entry matches the call flow.

Correct Answer: A

QUESTION 3:

An engineer is configuring a BOT device for a Jabber user in Cisco Unified Communication Manager Which phone type must be selected?

A. third-party SIP device
B. Cisco Dual Mode for iPhone
C. Cisco Dual Mode for Android
D. Cisco Unified Client Services Framework

Correct Answer: C

Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/11_5/CJAB_BK_D00D8CBD_00_deploymentinstallation-guide-cisco-jabber115/CJAB_BK_D00D8CBD_00_deployment-installation-guideciscojabber115_chapter_01000.html

QUESTION 4:

What is the major difference between the two possible Cisco IM and Presence high-availability modes?

A. Balanced mode provides user load balancing and user failover in the event of an outage. Active/standby mode provides an always-on standby node in the event of an outage, and it also provides load balancing.

B. Balanced mode provides user load balancing and user failover only for manually generated failovers. Active/standby mode provides an unconfigured standby node in the event of an outage, but it does not provide load balancing.

C. Balanced mode provides user load balancing and user failover in the event of an outage. Active/standby mode provides an always-on standby node in the event of an outage, but it does not provide load balancing.

D. Balanced mode does not provide user load balancing, but it provides in the event of an outage. Active/standby mode provides an always-on standby node in the event of an outage, but it does not provide load balancing.

Correct Answer: C

QUESTION 5:

Calls are being delivered to the end-user in a globalized format. Where does an engineer configure the calling number into a localized format?

A. route pattern
B. service parameters
C. IP phone
D. gateway

Correct Answer: D

QUESTION 6:

Which statement about Cisco Unified Communications Manager and Cisco IM and Presence backups is true?

A. Backups should be scheduled during off-peak hours to avoid system performance issues.
B. Backups are saved as .tar files and encrypted using the web administrator account.
C. Backups are saved as unencrypted .tar files.
D. Backups are not needed for subscriber Cisco Unified Communications Manager and Cisco IM and Presence servers.

Correct Answer: A

Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/11_5_1_SU1/Administration/cucm_b_administration-guide-1151su1/cucm_b_administration-guide-1151su1_chapter_01010.html#CUCM_TK_S7FC26D5_00

QUESTION 7:

An engineer with ID012345678 must build an international dial plan in the Cisco Unified Communications Manager. Which action should be taken when building a variable-length route pattern?

A. reduce the T302 timer to less than 4 seconds
B. configure a single route pattern for international calls
C. create a second route pattern followed by the # wildcard
D. set up all international route patterns to 0.!

Correct Answer: C

QUESTION 8:

Which field of a Real-Time Transport Protocol packet allows receiving devices to detect lost packets?

A. CSRC (Contributing Source ID)
B. Timestamp
C. Sequence number
D. SSRC (Synchronization identifier)

Correct Answer: C

QUESTION 9:

Which Cisco Unified Communications Manager service parameter should be enabled to disconnect a multiparty call when the call initiator hangs up?

A. Drop Ad Hoc Conference
B. H.225 Black Setup Destination
C. Block OffNet To OffNet Transfer
D. Enterprise Feature Access Code for Conference

Correct Answer: A

Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmsys/CUCM_BK_SE5FCFB6_00_cucm-system-guide-100/CUCM_BK_SE5FCFB6_00_cucm-systemguide100_chapter_011000.html#CUCM_TK_DFC66444_00

QUESTION 10:

lead4pass 350-801 practice test q10

Refer to the exhibit. When a UC Administrator is troubleshooting DTMF negotiated by this SIP INVITE, which two messages should be examined next to further troubleshoot the issue? (Choose two.)

A. REGISTER
B. UPDATE
C. PACK
D. NOTIFY
E. SUBSCRIBE

Correct Answer: DE

QUESTION 11:

How can an engineer determine location-based CAC bandwidth requirements for Cisco Unified Communications Manager?

A. Set the requirements in the service parameters.
B. Add the requirements for each audio and video codec and how many calls must be supported.
C. Execute the Resource Reservation Protocol to return location-based requirements.
D. Calculate the number of calls against the license for Cisco Unified Border Element to determine calls per location.

Correct Answer: B

QUESTION 12:

Which command is used in the Cisco IOS XE TDM gateway to configure the voice T1/E1 controller to provide clocking?

A. clock source line
B. Cisco IOS XE TDM gateway T1/E1 controller cannot provide clocking.
C. clocking source internal
D. clocking source network

Correct Answer: D

Reference: https://www.cisco.com/c/en/us/td/docs/routers/access/interfaces/NIM/software/configuration/guide/4gent1-e1-nim-guide.html

QUESTION 13:

Refer to the exhibit. lead4pass 350-801 practice test q13

An engineer verifies the configuration of an MGCP gateway. The commands are already configured. Which command is necessary to enable MGCP?

A. Device(config)# mgcp enable
B. Device(config)# ccm-manager enable
C. Device (config) # com-manager active
D. Device (config)# mgcp

Correct Answer: D

Latest Lead4Pass Cisco dumps Discount Code 2020

About The Lead4Pass Dumps Advantage

Lead4Pass has 7 years of exam experience! A number of professional Cisco exam experts! Update exam questions throughout the year! The most complete exam questions and answers! The safest buying experience! The greatest free sharing of exam practice questions and answers!
Our goal is to help more people pass the Cisco exam! Exams are a part of life, but they are important!
In the study, you need to sum up the study! Trust Lead4Pass to help you pass the exam 100%!
about lead4pass

Summarize:

This blog shares the latest Cisco 350-801 exam dumps, and 350-801 exam questions and answers! 350-801 pdf, 350-801 exam video!
You can also practice the test online! Lead4pass is the industry leader!
Select Lead4Pass 350-801 exams Pass Cisco 350-801 exams “Implementing and Operating Cisco Collaboration Core Technologies (CLCOR)”. Help you successfully pass the 350-801 exam.

ps.

Get Cisco Full Series Exam Dumps: https://www.vcecert.com/?s=Cisco (Updated daily)
The latest update Lead4pass 350-801 exam dumps: https://www.leads4pass.com/350-801.html (Total Questions: 347 Q&A)
^{[Q1-Q12 PDF]} Free Cisco 350-801 pdf dumps download from Google Drive: https://drive.google.com/file/d/1cIN4rk2SC3iQBAoqjJIVabGV8pyOu_wN/

[Updated 2022] https://drive.google.com/file/d/1Ri6UVCFsC8Qac9bchCfVEmVT3T0lJMzg/