The latest 300-630 dumps exam questions released today are verified, correct, and valid, candidates can use the PDF and VCE exam tools provided by Lead4Pass to help you practice all exam questions and guarantee you 100% success on the Cisco 300-630 DCACIA exam(Implementing Cisco Application Centric Infrastructure – Advanced).
The latest 300-630 dumps are available to all candidates taking the Cisco 300-630 DCACIA exam: https://www.leads4pass.com/300-630.html.
PS. Use discount code “Cisco”, Enjoy 15% off.
Free download of 2023 updated 300-630 dumps pdf: https://drive.google.com/file/d/1_FQ0WGO2taFcvWEHiSnSTMG9m5N-R7nh/
Free download of 2022 updated 300-630 dumps pdf:
https://drive.google.com/file/d/1o3cRFoyGbbdV7ptLRokMcFP_9638QVTy/
The latest Cisco 300-630 Dumps exam questions and answers are shared online:
New Question 1:
Refer to the exhibit.
An engineer is configuring a vSwitch policy in the existing Cisco ACI fabric. The requirement is for the Cisco ACI leaf to learn individual MAC addresses from the same physical port. Which vSwitch policy configuration mode must be enabled to meet this requirement?
A. MAC pinning
B. MAC binding
C. LACP passive
D. LACP active
Correct Answer: A
New Question 2:
An organization deploys active-active data centers and active-standby firewalls in each data center. Which action should be taken in a Cisco ACI Multi-Pod to maintain traffic symmetry through the firewalls?
A. Enable Endpoint Dataplane Learning
B. Disable service node Health Tracking
C. Enable Pod ID Aware Redirection
D. Disable Resilient Hashing
Correct Answer: B
New Question 3:
Refer to the exhibit. An engineer wants to avoid connectivity problems for the endpoint EP1 when it reaches an external L3Out network through the gateway 10.2.2.254/24. Which two configurations must be implemented in BD-BD2? (Choose two.)
A. Disable unicast-routing
B. Enable IP data plane learning for the VRF
C. Disable ARP flooding
D. Enable ARP flooding
E. Enable unicast-routing
Correct Answer: AC
New Question 4:
Refer to the exhibit. Between Cisco UCS Fls and Cisco ACI leaf switches, CDP is disabled, the LLDP is enabled, and LACP is in Active mode. Which two discovery protocols and load-balancing mechanism combinations can be implemented for the DVS? (Choose two.)
A. CDP enabled, LLDP disabled, and LACP Active
B. CDP disabled, LLDP enabled, and MAC Pinning
C. CDP enabled, LLDP disabled, and MAC Pinning
D. CDP enabled, LLDP enabled, and LACP Active
E. CDP enabled, LLDP disabled, and LACP Passive
F. CDP disabled, LLDP enabled, and LACP Passive
Correct Answer: BE
New Question 5:
In a Cisco ACI Multi-Site fabric, the Inter-Site BUM Traffic Allow option is enabled in a specific stretched bridge domain. What is used to forward BUM traffic to all endpoints in the same broadcast domain?
A. ingress replication on the spines in the source site
B. egress replication on the source leaf switches
C. egress replication on the destination leaf switches
D. ingress replication on the spines in the destination site
Correct Answer: D
Reference: http://yves-louis.com/DCI/?p=1277
New Question 6:
An engineer must implement a full mesh Cisco ACI Multi-Site architecture. Which action must be taken on each spine to accomplish this goal?
A. Configure BGP-EVPN Router-ID
B. Configure Multi-Pod Data-Plane TEP
C. Configure Overlay Unicast TEP
D. Configure Overlay Multicast TEP
Correct Answer: A
New Question 7:
DRAG DROP
A leaf receives unicast traffic that is destined for an unknown source, and a spine proxy is enabled in the corresponding bridge domain. Drag and drop the Cisco ACI forwarding operations from the left into the order the operation occurs on the right.
Select and Place:
Correct Answer:
New Question 8:
An engineer designs a Cisco ACI Multi-Pod solution that requires a pair of active-standby firewalls in different pods for external connectivity. How should the firewalls be implemented?
A. PBR for routed firewalls
B. separate L3Out peerings for routed firewalls
C. routed firewall for the default gateway
D. transparent firewalls
Correct Answer: D
New Question 9:
A customer is deploying a new application across two ACI pods that is sensitive to latency and jitter. The application sets the DSCP values of packets to AF31 and CS6, respectively. Which configuration changes must be made on the APIC to support the new application and prevent packets from being delayed or dropped between pods?
A. disable the DSCP translation policy
B. align the ACI QoS levels and IPN QoS policies
C. disable DSCP mapping on the IPN devices
D. align the custom QoS policy on the EPG site in the customer tenant
Correct Answer: D
Reference: https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2019/pdf/BRKACI-2210.pdf
New Question 10:
An engineer created a Cisco ACI environment in which multiple tenants reuse the same contract. The requirement is to prevent inter-tenant communication. Which action meets this requirement?
A. Create the contract in the user tenant with the scope set to VRF and export to other tenants
B. Create the contract in the common tenant with the scope set to the Tenant
C. Create the contract in the user tenant with the scope set to Global and export to other tenants
D. Create the contract in the common tenant with the scope set to Global
Correct Answer: B
New Question 11:
Which two actions are the Cisco best practices to configure NIC teaming load balancing for Cisco UCS B-Series blades that are connected to the Cisco ACI leaf switches? (Choose two.)
A. Create vPC+
B. Enable LACP active mode
C. Create PAgP
D. Create vPC
E. Enable MAC pinning
Correct Answer: BE
New Question 12:
An engineer must limit local and remote endpoint learning to the bridge domain subnet. Which action should be taken inside the Cisco APIC?
A. Disable Remote EP Learn
B. Enable Enforce Subnet Check
C. Disable Endpoint Dataplane Learning
D. Enable Limit IP Learning to Subnet
Correct Answer: B
New Question 13:
DRAG DROP
Drag and drop the tenant implementation designs from the left onto the outcomes of the design when a greenfield Cisco ACI fabric is deployed on the right.
Select and Place:
Correct Answer:
New Question 14:
Refer to the exhibit. An engineer must have communication between EPG1 in VRF1 and External EPG in VRF2. Which three actions should be taken for the defined subnets in the L3Out External EPG to accomplish this goal? (Choose three.)
A. Enable Shared Route Control Subnet
B. Enable External Subnets for External EPG
C. Enable Export Route Control Subnet
D. Enable Shared Security Import Subnet
E. Enable Aggregate Shared Routes
F. Enable Import Route Control Subnet
Correct Answer: CDF
New Question 15:
DRAG DROP
An engineer deploys a Cisco ACI Multi-Site Orchestrator for the first time. Drag and drop the actions from the left into the steps on the right to add a site and deploy new Cisco ACI objects to the fabric. Not all actions are used.
Select and Place:
Correct Answer:
…
| Number of exam questions | Update time | Exam name | More related |
| 15 | Sep 14, 2022 | Implementing Cisco Application Centric Infrastructure – Advanced (DCACIA) (300-630) | Cisco CCNP Exam Dumps (PDF+VCE) |
Question 1:
Refer to the exhibit. How is the ARP request from VM1 forwarded when VM2 is not learned in the Cisco ACI fabric?
A. Leaf 101 forwards the ARP request to one of the proxy VTEP spines.
B. POD1 spine responds to the ARP request after the POD1 COOP is updated with the VM2 location.
C. Leaf 101 encapsulates the ARP request into a multicast packet that is destined to 225.0.37.192.
D. Leaf 101 switch consumes the ARP reply of VM2 to update the local endpoint table.
Correct Answer: A
Question 2:
What does the VXLAN source port add to the overlay packet forwarding when it uses the hash of Layer 2, Layer 3, and Layer 4 headers of the inner packet?
A. ECMP
B. TCP optimization
C. disabled fragmentation
D. jumbo frames
Correct Answer: A
Question 3:
Which two actions are the Cisco best practices to configure NIC teaming load balancing for Cisco UCS B-Series blades that are connected to the Cisco ACI leaf switches? (Choose two.)
A. Create vPC+
B. Enable LACP active mode
C. Create PAgP
D. Create vPC
E. Enable MAC pinning
Correct Answer: BE
Question 4:
An organization migrates its virtualized servers from a legacy environment to Cisco ACI. VM1 is incorrectly attached to PortGroup IT|3TierApp|Web. Which action limits IP address learning in BD1?
A. Enable Enforce Subnet Check
B. Enable Rouge Endpoint Control
C. Enable GARP-based EP Move Detection Mode
D. Disable Remote EP Learn
Correct Answer: C
Question 5:
An engineer must limit local and remote endpoint learning to the bridge domain subnet. Which action should be taken inside the Cisco APIC?
A. Disable Remote EP Learn
B. Enable Enforce Subnet Check
C. Disable Endpoint Dataplane Learning
D. Enable Limit IP Learning to Subnet
Correct Answer: B
Question 6:
What is the purpose of the Forwarding Tag (FTAG) in Cisco ACI?
A. FTAG is used in Cisco ACI to add a label to the iVXLAN traffic in the fabric to apply the correct policy.
B. FTAG is used in Cisco ACI to add a label to the VXLAN traffic in the fabric to apply the correct policy.
C. FTAG trees in Cisco ACI are used to load balance unicast traffic.
D. FTAG trees in Cisco ACI are used to load balance mutli-destination traffic.
Correct Answer: D
Question 7:
Refer to the exhibit. Which three actions should be taken to implement the vPC in the Cisco ACI fabric? (Choose three.)
A. Select a common vPC interface policy group
B. Select individual interface profiles
C. Select common interface profiles
D. Select individual switch profiles
E. Select common switch profiles
Correct Answer: ABE
Question 8:
Refer to the exhibit. What must be configured in the service graph to redirect HTTP traffic between the EPG client and EPG server to go through the Cisco ASA firewall?
A. contract filter to allow ARP and HTTP
B. precise filter to allow only HTTP traffic
C. contract with no filter
D. permit-all contract filter
Correct Answer: A
Question 9:
Refer to the exhibits. Which subject must be configured for the All_noSSH contract to allow all IP traffic except SSH between the two EPGs?
A. Option A
B. Option B
C. Option C
D. Option D
Correct Answer: D
Question 10:
Refer to the exhibit. Two application profiles are configured in the same tenant and different VRFs. Which contract scope is configured to allow communication between the two application profiles?
A. global
B. VRF
C. application
D. tenant
Correct Answer: D
Question 11:
Refer to the exhibit. Which combination of flags in the Cisco ACI contract allows a client in WebClient EPG to establish an HTTP connection toward a server in WebServer EPG?
A. Apply Both Direction ENABLED and Reverse Port Filter ENABLED
B. Apply Both Direction DISABLED and Reverse Port Filter DISABLED
C. Apply Both Direction DISABLED and Reverse Port Filter ENABLED
D. Apply Both Direction ENABLED and Reverse Port Filter DISABLED
Correct Answer: C
Question 12:
Refer to the exhibit. Which two configurations enable inter-VRF communication? (Choose two.)
A. Set the subnet scope to Shared Between VRFs
B. Enable Advertise Externally under the subnet scope
C. Change the contract scope to Tenant
D. Change the subject scope to VRF
E. Export the contract and import as a contract interface
Correct Answer: BE
Question 13:
Which two actions should be taken to ensure a scalable solution when multiple EPGs in a VRF require unrestricted communication? (Choose two.)
A. Configure a taboo contract between the EPGs that require unrestricted communication between each other.
B. Enable Preferred Group Member under the EPG Collection for VRF section.
C. Set the VRF policy control enforcement preference to Unenforced.
D. Set the EPGs that require unrestricted communication between each other as preferred group members.
E. Set the EPGs that require policy enforcement between each other as preferred group members.
Correct Answer: CD
Question 14:
Refer to the exhibit. An engineer must have communication between EPG1 in VRF1 and External EPG in VRF2. Which three actions should be taken for the defined subnets in the L3Out External EPG to accomplish this goal? (Choose three.)
A. Enable Shared Route Control Subnet
B. Enable External Subnets for External EPG
C. Enable Export Route Control Subnet
D. Enable Shared Security Import Subnet
E. Enable Aggregate Shared Routes
F. Enable Import Route Control Subnet
Correct Answer: CDF
Question 15:
Refer to the exhibit. Between Cisco UCS Fls and Cisco ACI leaf switches, CDP is disabled, the LLDP is enabled, and LACP is in Active mode. Which two discovery protocols and load-balancing mechanism combinations can be implemented for the DVS? (Choose two.)
A. CDP enabled, LLDP disabled, and LACP Active
B. CDP disabled, LLDP enabled, and MAC Pinning
C. CDP enabled, LLDP disabled, and MAC Pinning
D. CDP enabled, LLDP enabled, and LACP Active
E. CDP enabled, LLDP disabled, and LACP Passive
F. CDP disabled, LLDP enabled, and LACP Passive
Correct Answer: BE
…
Free download of 2023 updated 300-630 dumps pdf: https://drive.google.com/file/d/1_FQ0WGO2taFcvWEHiSnSTMG9m5N-R7nh/
Free download of the 2022 updated 300-630 dumps pdf:
https://drive.google.com/file/d/1o3cRFoyGbbdV7ptLRokMcFP_9638QVTy/
The above Cisco 300-630 Dumps exam contains 15 questions that you can practice to improve yourself. The latest version of the 300-630 dumps, updated in September 2022, contains 76 exam questions and answers that candidates can practice to help you successfully pass
Cisco 300-630 DCACIA exam. You are welcome to use the latest version of 300-630 dumps https://www.leads4pass.com/300-630.html. Escort your career leap.
